Order now 1-866-424-1504
Our Heavy Duty Clamp on Bucket forks, Loader Forks, or sometimes called pallet forks Slide over the cutting edge of your bucket and clamp down with the handle locking the unit in place.
Stake tube to insert your standard 2"x4" piece of lumber for roll back protection fence
The usable length is 43 inches.
Rated for 3500 lb. even load
Showing reviews 1-10 of 11 | Next
Posted by Noel Warren on 28th Nov 2013
Prompt shipment and delivery. Heavy duty product, easily installed, handled loads as advertised.
My application includes handling pipe, structural steel, logs, and brush; frequently on uneven and sloping terrain. Most loads are not palletized, and usually must be lifted by inserting fork tips into piles of material or scooping from the ground.
Our loader bucket has a very thick cutting edge, tapering on both top and bottom; which will not seat into the forward slot in the fork clamping assembly. Consequently, when backing the forks out of heavy loads on the ground, one or both forks slid forward on the bucket even though the clamping bolt was tightly secured.
We will weld a 4" x 6" x 3/8" flat bar inside the lower clamping element, such that the lip on the cutting edge will prevent forward slippage.
Also, in our application, the fork tips are frequently buried in the ground, or are used to wedge between pipes or logs stacked without spacers. We will install a pair of inserts having solid wedge-shaped tips to seal the fork tubes.
Even with the above modifications, we will have a cost effective solution for our particular application. Thank you for both the product and the prompt service.
Posted by Unknown on 12th Nov 2013
We have used the forks a couple of times now. They are a good product. However- we have found when moving pallets there needs to be a second person to help gauge the distance. We put 2X4's in the slots; that helps keep things from sliding into the bucket. The only down side for me is- my hands aren't strong enough to tighten the bolts to the bucket. My brother can get two or three more turns in (which matters if the fork will slide around).
We will contuine to use the forks! They have done what we needed. Good product for the price & AMERICAN made!
Posted by John Kennedy on 24th Aug 2013
Your clamp-on forks arrived three days after they shiped, thanks.
The fork are very well made, much better than expected.
Once I clamp them on the bucket I started moving down cedar trees, the forks never moved.
Thanks for a great American made product !!!
Posted by Ed on 25th Jul 2013
Good product for the price. Shipped fast. Saved us a ton in rental expenses for a small project, that required a fork lift.
Posted by Dave Yoder on 8th Jul 2013
I originally ha the 700 lb. square bales of hay in mind when I purchased these forks. Seller loads them into my wifes' truck, then how the heck do I unload them into the hay room of our barn? With a lot of trouble! Enter the clip-on forks. As an added complication-seller ran out of large square bales-only had the round bales weighing signifigantly more. My 35 horse couldn't quite lift it outright, but with nudges and using the bucket to pull it we placed the huge round bales where they needed to go. These forkd exceeded my needs.
Posted by Ken, Virginia Beach on 12th Jun 2013
I have not used them yet but the quality appears to be very good. I could not build them for the price and I am sure we will get lots of use out of them.
Posted by Unknown on 9th May 2013
Good forks. Easy off/on yet stay on when in use. Great value!
Posted by John on 2nd Mar 2013
Well worth the price including shipping compared to Northern
Used them the first day and very pleased with the construction and ease of use.
Posted by Jim on 25th Jan 2013
Thanks. I must say your Customer Service is excellent. The gent that packages had held a set of forks for me when I stopped by on Monday evening. I had intended to purchase a set of the Heavy Duties that day, but My wife Must have needed money ,as I was a few 20's shy of what I thought I had in my wallet.
I The spoke with John Sr on Monday Evening, when he returned my message from the Toll free.
Yesterday, Tuesday, I talked with John Senior to confirm that he would be there for me to Pick them Up. On a whim, I asked John Sr if I could put in a request for custom alterations If I stopped and Paid in advance. He asked what I wanted ( Flip the Forks over Tips down, and weld the ends shut, Since I need to get under logs, and did not want to pack mud in the tubes), Told me "Sure, I'll weld them up Now". Took them Home with me, Excellent!
Thanks Much, I'll be back for a Tooth bar when I save up my "Lunch Money". I Have told a few guys I work with that own Tractors about your Fine Business.
Posted by Donald on 25th Jan 2013
Just wanted to let you know I love the forks. Can’t imagine how I lived without them for this long. I’m using them as a portable platform all the way out to moving 12’ firewood logs.
Showing reviews 1-10 of 11 | Next